Aldie, VA
Overland Pearl in Aldie
Long porcelain pavers connect the pool deck, covered patio, dining area and outdoor kitchen at this farmhouse retreat.
Overland Pearl · 24×48The Long Format
24×48 Porcelain Pavers
Explore long-format porcelain colors for patios and pool decks. Compare laying directions, completed installations and companion sizes before choosing your samples.
Browse 24×48 Porcelain Paver Colors
Color
Browse by look
Showing 10 of 11 porcelain pavers
Ark Silver
24×48Check stock
Indiana Beige
24×48Check stock
Indiana Blanco
24×48Check stock
Indiana Gris
24×48Check stock
Luna Off White
24×48Check stock
Nexus White
24×48Check stock
Overland Anthracite
24×48Check stock
Overland Greige
24×48Check stock
Overland Pearl
24×48Check stock
Overland Sand
24×48Check stock
Rasa Gray
24×48Check stock
See 24×48 Porcelain Pavers Installed
Fairfax, VA
Rasa Gray in Fairfax
Study Rasa Gray 24×48 in this split-level outdoor room, then explore the complete patio to see how square and rectangular formats work together.
Rasa Gray · 24×48
McLean, VA
Overland Pearl & Black Basalt
Overland Pearl 24×48 paving and Black Basalt coping bring a light field and a dark pool edge together in McLean.
Overland Pearl · 24×48How 24×48 Changes the Layout
A long rectangle emphasizes direction. Plan its orientation relative to the house, pool, steps and outdoor kitchen. Around a narrow walk or irregular deck, a large piece can produce more offcuts even if the finished lines look simpler.
The long format works in more than one size of space. Use the actual paver dimensions, practical cuts and necessary joints to fit the space.
5 layout ideas for 24×48 pavers
Stacked Grid
Align the joints in both directions for a regular grid.
Running Bond
Offset each row by one-third of a paver. The selected product’s permitted offset still applies.
Diagonal Grid
Turn a straight grid through 45° and plan the cuts around the perimeter.
Herringbone
Rectangles meet at right angles to form a continuous zigzag.
Basketweave
Pairs of rectangles alternate direction. Confirm the actual sizes and joint module work together.
Compare 24×24, 24×36 & 24×48 Pavers
Square pavers give a regular grid; long rectangles emphasize direction. Compare the three common formats against the house, pool edge, furniture and cuts around the space. Inch sizes are nominal. Use the selected SKU’s box coverage to plan full-box quantities and agree the cutting allowance with your installer.
24×24
A balanced square
Typically 60 × 60 cm. Align the grid with your pool or patio, turn it on the diagonal, or arrange grouped panels.
7.75 sq ft / box
Browse 24×24 Colors24×36
A versatile rectangle
A middle proportion for patios and walkways. Compare a straight grid with staggered rows or a change in laying direction.
11.63 sq ft / box
Browse 24×36 Pavers24×48
A longer rectangle
Create longer directional runs. Compare portrait and landscape orientation, permitted offsets and cuts around the perimeter.
15.5 sq ft / box
Browse 24×48 PaversInch sizes are nominal. Order by the listed box coverage and allow for joints, cuts and compatible production batches when combining formats.
Direction, Cuts & Edges
Lay Out the Long Format Before Ordering
Start from a measured drawing showing the pool or patio perimeter, access paths, doors and steps. Test the direction of the main joints and try to avoid narrow strips at important edges. A mock-up or layout drawing helps when combining sizes.
Long porcelain pieces can be more demanding to handle, cut and support than square pieces. Plan for flatness, bedding, cutting tools and the manufacturer's permitted offsets before selecting a pattern.
15.5 sq ft per box in the current 24×48 range.
Around the pool
Position long runs around coping, skimmers, drains and raised-spa edges, with finished heights and drainage planned together.
Across the patio
Align the pattern with doors, furniture zones and steps. Compare the main laying direction before planning edge cuts.
With other sizes
Choose compatible colors and finishes within the series. Coordinate joints, layout and production batches when mixing formats.
In full boxes
Use the selected product’s box coverage and full-pack increments. Agree a cutting allowance for the particular layout with your installer.
Which Base Can Support 24×48 Porcelain?
Some outdoor porcelain products have documented mortar-bonded, prepared sand/aggregate or raised-support installation methods. These are not automatically interchangeable, and a nominal 20 mm thickness alone does not certify any particular span or vehicle load.
For an existing concrete deck, assess slab condition, slope, movement joints and added finished height. For pedestals, the support layout, wind and load requirements must match the exact product's tested assembly. For a new base, the installer is responsible for subgrade preparation, drainage and edge restraints.
Porcelain Paver Installation Options
Ground-level patios and paths
Sand or aggregate setting bed
- 1Porcelain pavers
- 2Sand / aggregate setting bed
- 3Compacted aggregate base
- 4Prepared ground
Pavers sit on a prepared setting bed over a compacted base. Plan drainage, edge restraints and joints with the selected system.
Prepared concrete slabs and overlays
Mortar over concrete
- 1Porcelain pavers
- 2Bonding mortar
- 3Concrete slab
A bonded assembly attaches the porcelain to a concrete base. Slab condition, movement joints, drainage and finished heights need to be coordinated.
Products approved for raised installations
Raised pedestal system
- 1Porcelain pavers
- 2Adjustable pedestals
- 3Open space for drainage / services
- 4Supporting surface
Pedestals leave space below the paving for drainage and service access. The exact paver determines support positions, loading and any additional reinforcement.
Choose Your Finish & Plan the Order
View several complete product faces where possible. One sample may not show the pattern variation across an installed deck. Light neutrals, whites and grays may look different in shade versus full sun; review the selected material next to its eventual coping and building finishes.
To request material pricing, send SKU or series, estimated square footage, shipping ZIP code, any additional sizes and any coordinating coping. Confirm actual dimensions, pieces per box, availability and lot consistency before ordering.
Technical Specifications
Product & Use
| Material | Porcelain |
|---|---|
| Country of origin | Turkey |
| Color tones | See individual product |
| Application areas | Indoor, outdoor |
| Application categories | Residential, light commercial, heavy commercial |
| Collection products | 20 mm (2 cm) pavers |
| Custom fabrication | Limited: custom bullnose and lamination, locally or overseas |
| Shade / variation | See individual product |
Performance
| Water absorption by mass (EN ISO 10545-3) | < 0.1% |
|---|---|
| Breaking strength (EN ISO 10545-4) | > 9,500 N |
| Flexural / bending strength (EN ISO 10545-4) | Minimum 35 N/mm² (approximately 5,000 psi) |
| Coefficient of thermal expansion (EN ISO 10545-8) | < 9.0 × 10⁻⁶ /°C |
| Thermal shock resistance | Resistant |
| Crazing resistance | Resistant |
| Frost resistance | Resistant |
| Reaction to fire | Class A1 |
| DCOF, dry / wet | 0.81 / 0.69 |
| Slip-resistance classification | R11, anti-slip |
| Mohs hardness | ≥ 7 |
| Sealer requirement | Not required |
| Chemical / acid resistance | Yes |
Manufacturer-reported specifications for the STONELUX 20 mm porcelain paver range. Colors and shade variation are shown on individual products.
DCOF values and R11 are separate test results. Driveway use requires a concrete base and a bonded installation system designed for the expected vehicle loads.
24×48 Porcelain Paver Questions
Are 24×48 porcelain pavers exactly 24 by 48 inches?
Not necessarily. The label is nominal. Verify the specific manufacturer's actual length, width, thickness and permitted tolerances before laying out cuts, joints or quantities.
How much does a box of 24×48 porcelain pavers cover?
The 24×48 products shown here are sold in full boxes. Each box covers 15.5 sq ft. Add the project’s cutting allowance and round up to full boxes. The 24×48 label is nominal, so it should not be treated as an exact 8 sq ft of coverage per piece.
Can I use 24×48 porcelain around a pool?
An appropriate exterior product can be used with an approved assembly. Confirm wet-use performance, slopes, support, movement joints, coping transitions and the exact manufacturer's guidance.
Can 24×48 be installed over concrete?
Potentially. The concrete condition, drainage, movement joints and finished levels must suit the approved bonded or other permitted system. Your installer must assess the substrate.
Is a staggered pattern required for 24×48?
No universal pattern is required. The manufacturer may limit offsets depending on the product's dimensional characteristics. Review the exact series' instructions before selecting a running bond.
Can 24×48 match a 24×24 from the same series?
Often that is the design goal, but not every series offers both sizes or guarantees identical dimensions and shades. Confirm available formats, finish and lot.
Do larger porcelain pavers need a special base or pedestal?
The appropriate support depends on the exact product and loads. Larger format alone does not prove pedestal compatibility or vehicular suitability. Ask for a system-specific installation detail.
Surface previews for color comparison.
See It in Your Own Light
Choose Samples for Your Project
Compare actual samples beside your home, coping and planting. Send the design, preferred size, approximate area and delivery ZIP code for material pricing and current availability.
Visit Our Sterling Showroom