The square 12x12 format is useful for radius pools, custom-shaped pools, spa edges, corners, and shorter runs where larger coping pieces would require more cutting. The 3cm thickness can also work well for remodel conditions or lower-profile edge details when the project does not require a 2" coping piece. This product coordinates with Pera Cream Marble pavers, veneer, treads, and related coping sizes.

Pera Cream Marble Coping Key Features

• Material: Natural marble with beige, cream, and soft white tones.
• Finish: Sandblasted surface with a matte exterior texture.
• Profile: Single Bullnose profile with one rounded long edge.
• Size: 12x12 format for radius pools, spas, corners, and shorter runs.
• Thickness: 1-3/16" (3CM) thickness for lower-profile coping conditions.
• Applications: Pool coping, step tread, and wall cap details.

Where to Use 12x12x3cm Pera Cream Marble Coping

Pool Edges and Spas

The 12x12 size is commonly used around radius pools, spas, corners, and custom-shaped waterlines because smaller pieces can follow changes in direction with less cutting than larger coping formats.

Wall Caps and Step Treads

The single bullnose edge can finish exposed wall and step fronts where a rounded marble edge is preferred. Confirm support, slope, setting materials, jointing, and edge exposure before installation.

Remodel and Lower-Profile Conditions

The 3cm thickness may be useful in remodel projects where the existing edge condition, deck height, or transition detail does not suit thicker 2" coping. Final selection should be based on the pool structure and installation method.

Care & Maintenance

Pera Cream Marble is natural stone, and sealing is required for this collection. Use pH-neutral cleaners and avoid acidic cleaners, vinegar, harsh chemicals, and abrasive pads. Outdoor performance depends on proper substrate preparation, drainage, slope, jointing, sealing, and regular maintenance.

Professional installation is recommended for best results.

Required Exterior Marble Installation

STONELUX installation requirement: Do not install this marble coping, cap, or tread directly over sand, gravel, aggregate, stone dust, or soil. Permanently bond it to a properly prepared concrete or approved cementitious support with an exterior-rated wet-set mortar system or white polymer-modified mortar approved for natural stone.

Require full mortar coverage and plan slope, drainage, movement joints, waterproofing where applicable, and all transitions before work begins. Moisture moving through an unsuitable substrate or setting system can contribute to staining or efflorescence in marble and other light stone. Review LATICRETE guidance for installing natural stone and the CUSTOM marble installation bulletin with the project installer.

Sealing Exterior Marble

All exterior marble supplied by STONELUX must be sealed after installation and the setting system's required cure time. Use a sealer compatible with the marble, finish, exposure, and desired appearance. STONELUX recommends TERATONE 467 Color Enhancing Deep Penetrating Protector for compatible unfinished or sandblasted marble when a richer color and satin appearance are desired. Review the TERATONE manufacturer guidance, test a small inconspicuous area first, avoid overapplication, and follow all label directions. Sealer does not replace correct substrate preparation, drainage, waterproofing, or maintenance.