The square format works well for column and wall-cap conditions where the cap is seen from more than one direction. The four-side eased edge softens the perimeter while keeping a clean squared-off look. This piece coordinates with Pera Cream Marble pavers, coping, veneer, and treads for projects that use the same cream marble tone across walls, pool areas, and outdoor living details.

Pera Cream Marble Cap Key Features

• Material: Natural marble with beige, cream, and soft white tones.
• Finish: Sandblasted surface with a matte exterior texture.
• Profile: All Side Eased Edge profile for exposed perimeter conditions.
• Size: 24x24 square format for caps, columns, piers, and landings.
• Thickness: 2" (5CM) thickness for exterior cap applications.
• Application: Wall cap details and related outdoor cap conditions.

Where to Use 24x24 Pera Cream Marble Four-Side Eased Caps

Wall and Column Caps

The all-side eased edge is useful when more than one side of the cap is exposed, such as column caps, pier caps, low walls, and freestanding wall conditions.

Outdoor Living Details

The square marble format can finish outdoor kitchens, seat walls, raised features, and transition points when the project needs a cream marble cap rather than a field paver.

Coordinated Pera Cream Marble Projects

This cap can be paired with Pera Cream Marble coping, pavers, veneer, and treads when the design calls for matching stone across horizontal and vertical details.

Care & Maintenance

Pera Cream Marble is natural stone, and sealing is required for this collection. Use pH-neutral cleaners and avoid acidic cleaners, vinegar, harsh chemicals, and abrasive pads. Outdoor performance depends on proper substrate preparation, drainage, slope, jointing, sealing, and regular maintenance.

Professional installation is recommended for best results.

Required Exterior Marble Installation

STONELUX installation requirement: Do not install this marble coping, cap, or tread directly over sand, gravel, aggregate, stone dust, or soil. Permanently bond it to a properly prepared concrete or approved cementitious support with an exterior-rated wet-set mortar system or white polymer-modified mortar approved for natural stone.

Require full mortar coverage and plan slope, drainage, movement joints, waterproofing where applicable, and all transitions before work begins. Moisture moving through an unsuitable substrate or setting system can contribute to staining or efflorescence in marble and other light stone. Review LATICRETE guidance for installing natural stone and the CUSTOM marble installation bulletin with the project installer.

Sealing Exterior Marble

All exterior marble supplied by STONELUX must be sealed after installation and the setting system's required cure time. Use a sealer compatible with the marble, finish, exposure, and desired appearance. STONELUX recommends TERATONE 467 Color Enhancing Deep Penetrating Protector for compatible unfinished or sandblasted marble when a richer color and satin appearance are desired. Review the TERATONE manufacturer guidance, test a small inconspicuous area first, avoid overapplication, and follow all label directions. Sealer does not replace correct substrate preparation, drainage, waterproofing, or maintenance.