The 24x36 format creates a larger rectangular module than standard 24x24 pavers, which can help reduce joint lines and create a more linear outdoor layout. It coordinates with Pera Cream Marble coping, caps, veneer, and related paver sizes for projects that carry the same beige, cream, and soft white stone tones across pool, patio, wall, and step details.

Pera Cream Marble Paver Key Features

• Material: Natural marble with beige, cream, and soft white tones.

• Finish: Sandblasted surface with a matte outdoor texture.

• Size: 24x36 format for larger stepping stone and patio layouts.

• Thickness: 2" (5CM) thickness for exterior paver applications.

• Applications: Pool and patio decks, stepping stones, walkways, and outdoor living areas.

Where to Use 24x36 Pera Cream Marble Stepping Stones

Pool and Patio Decks

The 24x36 format can create broad rectangular paving fields around pools, patios, and outdoor rooms. Confirm base preparation, drainage, slope, joint spacing, and layout pattern before installation.

Walkways and Garden Paths

This size can be used as individual stepping stones or as part of a larger paved walkway. Installers should confirm setting method, joint material, edge restraint, and finished grade based on the site conditions.

Coordinated Outdoor Stone Systems

Pera Cream Marble pavers can coordinate with matching coping, caps, and veneer when the project needs the same cream marble tone across horizontal and vertical details.

Care & Maintenance

Pera Cream Marble is natural marble, and sealing is required for this collection. Use pH-neutral cleaners and avoid acidic cleaners, vinegar, harsh chemicals, and abrasive pads. Exterior performance depends on proper base preparation, drainage, slope, sealing, jointing, and ongoing maintenance.

Professional installation is recommended for best results.

Required Exterior Marble Installation

STONELUX installation requirement: Do not dry-lay this marble paver or install it directly over sand, gravel, aggregate, stone dust, soil, or turf. Install it over a properly designed, cured concrete slab or approved cementitious substrate using an exterior-rated wet-set mortar system or white polymer-modified thin-set or large-and-heavy-tile mortar approved for natural stone.

Require full mortar coverage and plan slope, drainage, movement joints, waterproofing where applicable, and all transitions before work begins. Moisture moving through an unsuitable substrate or setting system can contribute to staining or efflorescence in marble and other light stone. Review LATICRETE guidance for installing natural stone and the CUSTOM marble installation bulletin with the project installer.

Sealing Exterior Marble

All exterior marble supplied by STONELUX must be sealed after installation and the setting system's required cure time. Use a sealer compatible with the marble, finish, exposure, and desired appearance. STONELUX recommends TERATONE 467 Color Enhancing Deep Penetrating Protector for compatible unfinished or sandblasted marble when a richer color and satin appearance are desired. Review the TERATONE manufacturer guidance, test a small inconspicuous area first, avoid overapplication, and follow all label directions. Sealer does not replace correct substrate preparation, drainage, waterproofing, or maintenance.