tundra grey marble sand blasted 14x24x2 single bullnose coping

Stock & Availability

Backorder

on backorder

Loading trade options…

Sold by piece (EACH)

Tundra Grey Marble Sand Blasted 14x24x2 Single Bullnose Coping is a gray marble coping, cap, and tread piece from the Tundra Grey Marble Collection. The 14x24x2 size, 2" (5CM) thickness, and Single Bullnose profile are used for pool edges, wall caps, and step treads. The Sandblasted finish gives the stone a matte texture, and V2 (Slight Variation) supports a balanced look across individual pieces with modest shade movement.

tundra grey marble sand blasted 14x24x2 single bullnose coping

Product Details

Material:

Marble

Size:

14x24

Thickness:

2" (5CM)

Color Tone:

Gray

Stock & Availability

Status

Backorder

Sold by piece (EACH)

Loading trade options…

Tundra Grey Marble Sand Blasted 14x24x2 Single Bullnose Coping is a gray marble coping, cap, and tread piece from the Tundra Grey Marble Collection. The 14x24x2 size, 2" (5CM) thickness, and Single Bullnose profile are used for pool edges, wall caps, and step treads. The Sandblasted finish gives the stone a matte texture, and V2 (Slight Variation) supports a balanced look across individual pieces with modest shade movement.

Close-up of the Tundra Grey Marble Sand Blasted 14x24x2 Single Bullnose Coping by STONELUX. This marble piece features a sandblasted finish with subtle grey texture and veining, ideal for pool edges and wall caps, highlighting its premium stone quality.
14x24

Backorder

Discover the Collection

Tundra Grey Marble

Tundra Grey Marble

View all 23 products

Tundra Grey Marble Pool Deck & Bluestone Coping – McLean, VA - Project Photo
Tundra Grey Harmony – A Unified Marble Pool Retreat in McLean - Project Photo
Lakeview Retreat, Pool, and Patio | Tundra Grey Marble - Project Photo

Tundra Grey Marble is a natural grey marble with soft light-grey tones, subtle white movement, and a sandblasted finish for outdoor use. It is a strong option for pool decks, patios, walkways, and outdoor living spaces where a clean grey marble surface is preferred.

The STONELUX Tundra Grey Marble collection includes grey marble pavers, pool coping, oversized treads, wall cap applications, and related outdoor stone pieces. It works well for modern pool decks, grey patios, rounded pool edges, steps, raised walls, and projects that need a light grey marble field without a warm beige direction.

Recommended Applications

Pool Coping

Pool edges, spa coping, and water feature trim

Wall Cap

Retaining wall caps, seat walls, and garden wall tops

Step Tread

Stair treads, risers, and landing surfaces

Packaging Information

Pack Quantity:

40 EACH

Pack Weight:

3178 lbs

Pack Size:

44"x37"x30"

Product Technical Specifications

SKU:

COP-TUNGREMAR-SB-14x24x2-SB

UOM (unit of measure):

EACH

Pack Quantity:

40.00

Sold As:

Sold by piece (EACH)

Color Tones:

Gray

Product Type:

Coping / Cap / Tread

Thickness:

2" (5CM)

Size:

14x24

Profile:

Single Bullnose

Texture/Surface:

Sandblasted

Product Usage:

Pool Coping, Wall Cap, Step Tread

Weight (uom) lbs:

67.86 lbs/EACH

Collection:

Tundra Grey Marble

Material:

Natural Stone

Stone Type:

Marble

Origin Country:

Turkey

Collection Products:

Paver, Coping, Slab/Tread, Veneer, Accessories

Custom Fabrication:

Yes (local/overseas)

Application Areas:

Indoor, Outdoor

Application Category:

Residential, Commercial

Shade/Variation:

V2 (Slight Variation)

Sealer Requirement:

Required

Chemical/Acid Resistance:

No

DCOF (dry/wet):

0.81 - 0.68

MOHs Scale:

4

Density (ASTM C97):

177.29 lbs/ft3

Compressive Strength (ASTM C170):

18122 psi

Water Absorption (ASTM C97):

0.16 %

This Material in Projects

Explore installation photos featuring this product.

Product Description

The wider format gives more cap surface than 12x24 and can help with larger pool edges or wall cap layouts. This piece coordinates with Tundra Grey Marble pavers, veneer, accessories, and related coping sizes for projects that carry the same stone across pool, patio, wall, and step details.

Tundra Grey Marble Coping Key Features

  • Material: Marble with gray tones.
  • Finish: Sandblasted surface for a matte exterior texture.
  • Profile: Single Bullnose profile for exposed pool, wall, or step conditions.
  • Size: 14x24x2 format for layout and edge planning.
  • Thickness: 2" (5CM) thickness for coping, cap, or tread applications.

Color & Design Ideas

Tundra Grey Marble is listed with gray tones and V2 (Slight Variation). The sandblasted marble surface works well when the design needs natural movement rather than a flat, uniform color.

Tundra Grey Marble can be coordinated with matching field pavers such as Tundra Grey Marble Sand Blasted French Pattern 3cm Paver, Tundra Grey Marble Sand Blasted 16x24 3cm Paver. Confirm samples, shade variation, joint color, and edge profiles before final layout.

Published project examples for this collection include Lakeview Retreat, Pool, and Patio | Tundra Grey Marble, Backyard Oasis McLean VA with Tundra Grey Marble and Black Basalt, which can help show how the stone reads across a finished pool or outdoor layout.

Where to Use Tundra Grey Marble Coping

Pool Edges

Use this piece to finish the pool perimeter and create an exposed stone edge. Confirm overhang, pitch, corners, and profile orientation before installation.

Wall Caps

This stone can cap low walls, raised planters, and other masonry features when the width and edge detail fit the wall assembly. Slope and joint treatment should be planned to help shed water.

Steps and Treads

The profile and thickness can be used for step fronts or landings where a finished stone edge is needed. Confirm riser layout, bearing, and joint spacing before setting the pieces.

Care & Maintenance

Sealing is required for Tundra Grey Marble, especially outdoors and around pools. Clean with pH-neutral stone cleaner and avoid acidic cleaners, vinegar, harsh chemicals, and abrasive pads when the material is natural stone.

For installation, verify substrate preparation, setting materials, drainage, overhang, movement joints, and edge alignment. Professional installation is recommended for best results.

Required Exterior Marble Installation

STONELUX installation requirement: Do not install this marble coping, cap, or tread directly over sand, gravel, aggregate, stone dust, or soil. Permanently bond it to a properly prepared concrete or approved cementitious support with an exterior-rated wet-set mortar system or white polymer-modified mortar approved for natural stone.

Require full mortar coverage and plan slope, drainage, movement joints, waterproofing where applicable, and all transitions before work begins. Moisture moving through an unsuitable substrate or setting system can contribute to staining or efflorescence in marble and other light stone. Review LATICRETE guidance for installing natural stone and the CUSTOM marble installation bulletin with the project installer.

Sealing Exterior Marble

All exterior marble supplied by STONELUX must be sealed after installation and the setting system's required cure time. Use a sealer compatible with the marble, finish, exposure, and desired appearance. STONELUX recommends TERATONE 467 Color Enhancing Deep Penetrating Protector for compatible unfinished or sandblasted marble when a richer color and satin appearance are desired. Review the TERATONE manufacturer guidance, test a small inconspicuous area first, avoid overapplication, and follow all label directions. Sealer does not replace correct substrate preparation, drainage, waterproofing, or maintenance.

Related Options

The Tundra Grey Marble Collection includes matching pavers, coping profiles, slab/tread pieces, veneer, and accessories for coordinated outdoor layouts. Related options include Tundra Grey Marble Collection, Lakeview Retreat, Pool, and Patio | Tundra Grey Marble, Tundra Grey Marble Sand Blasted 16x24x2 Single Bullnose Coping, Tundra Grey Marble Sand Blasted 12x24x2 Single Bullnose Coping.

Frequently Asked Questions

What is Tundra Grey Marble Sand Blasted 14x24x2 Single Bullnose Coping used for?

This piece is used for pool coping, wall caps, and step treads when the 14x24x2 size, 2" (5CM) thickness, and Single Bullnose profile fit the project layout. It can coordinate with Tundra Grey Marble pavers and related pieces from the same collection.

How does the Single Bullnose profile affect the edge?

Single bullnose has one rounded long edge. It is commonly used where the exposed side faces the pool, wall, or step front and a softer finished edge is preferred.

Is the 14x24x2 size practical for pool coping?

The wider format gives more cap surface than 12x24 and can help with larger pool edges or wall cap layouts. Project requirements still vary, so installers should confirm beam width, overhang, radius conditions, cover brackets, corners, and waste before ordering.

What does the Sandblasted finish do on this coping?

The Sandblasted finish gives the surface a matte, textured face rather than a polished surface. The listed DCOF value is 0.81 - 0.68, which can be used as a traction indicator, but slope, water, cleaning, footwear, and maintenance still affect real-world performance.

Does this Tundra Grey Marble coping need sealing?

Yes. All exterior marble supplied by STONELUX must be sealed after installation and the setting system's required cure time. Use a compatible natural stone sealer and pH-neutral care products. STONELUX recommends TERATONE 467 for compatible unfinished or sandblasted marble when color enhancement and a satin appearance are desired. Review the manufacturer guidance, test a small inconspicuous area, and avoid overapplication. Sealing does not replace correct drainage, substrate preparation, or maintenance.

What colors and design styles work with Tundra Grey Marble?

Tundra Grey Marble is listed with gray tones. Gray and silver stone tones usually pair well with white, charcoal, black metal, stainless steel, cool-toned plaster, and simple planting palettes.

What products are commonly paired with this coping?

Tundra Grey Marble can be coordinated with matching field pavers such as Tundra Grey Marble Sand Blasted French Pattern 3cm Paver, Tundra Grey Marble Sand Blasted 16x24 3cm Paver. Confirm samples, shade variation, joint color, and edge profiles before final layout.

Are there project examples using Tundra Grey Marble?

Published project examples for this collection include Lakeview Retreat, Pool, and Patio | Tundra Grey Marble, Backyard Oasis McLean VA with Tundra Grey Marble and Black Basalt, which can help show how the stone reads across a finished pool or outdoor layout.

How is this coping sold?

Sold by piece (EACH). Confirm the run length, corners, cuts, waste allowance, profile direction, and any matching paver or tread needs before ordering.

Can this marble coping, cap, or tread be installed directly over sand or aggregate?

No. STONELUX requires exterior marble coping, caps, and treads to be permanently bonded to a properly prepared concrete or approved cementitious support with an exterior-rated wet-set mortar system or white polymer-modified mortar approved for natural stone. See LATICRETE natural stone guidance and the CUSTOM marble installation bulletin for supporting technical information.

Loading related products...

STONELUX

Premium Natural Stone

Premium supplier of natural stone and porcelain, specializing in travertine, marble, and luxury surfaces.

Download on the App StoreGet it on Google Play

Contact Info

Warehouse & Showroom:
23700 Pebble Run Place Suite 175
Sterling, VA 20166

Phone: (571) 353-3311
Email: info@stonelux.com

Hours:
Monday-Friday: 08:00 – 16:00
Saturday: Appointment Only
Sunday: Closed

Karamehmet
© 2026 STONELUX. All rights reserved.Privacy Policy|Terms & Conditions